Pages

Friday, August 29, 2014

Design Wall

I now have my very own design wall.  So no more (or maybe less) using the floor for trialling layouts. 

We bought a sheet of Fome Cor - Foam Board from PSP in Petone, who also delivered it.  The board is only 5mm thick and incredibly light, similar to the paper coated foam board available in art shops. 

The sheet needed to be trimmed to fit the space where it is to hang, super easy to cut with quilting tools! blunt (for fabric) rotary blade, ruler and cutting board. 
mitred plastic strips


plastic strips (the shorter edge is on the front)
The board is covered in thickish brushed cotton fabric that is mostly used for curtain interlinings - the extra layer between the curtain and the lining.  The fabric was cut a little larger than the board and fixed in place with plastic strips (Hardiglaze 6mm Premium Capping Mould - select accessories) purchased from a local hardware store.  The strip slides over the edge and holds the fabric without the need for glue.

 

The board is attached to the wall with 3M velcro-like strips that had been cut narrower. The velcro is on both sides so the board can be removed and turned around so the shiny side can be used.  

Works a treat, maybe my quilts will now get a bit bigger!
completed design wall - still no progress with the stars ...



No comments: